Laurence Mathews | Glue Booth

Product Categories

Help / Tips / Messages

Please select category

Winsor & Newton

Daler Rowney

Artists' Materials

Crafts And Kits

Graphics Materials

Picture Framing & Mount Cutters

In-store Demonstrations

DVDs

Artists' Corner

Wooden Models and Kits

Plastic Models & Kits

Model Tools, Paints & Glues

Calligraphy

Derwent Pencil Range

Paint By Numbers

Airbrushes

Glue Booths

Glue Booth

Radio Controlled

Caran d'Ache

Mamod

Portfolios

Clearance Lines

Dylon Dyes

Manufacturers

Huge range of fine artists' materials at
1, Queens Road,
Southend-on-Sea
Essex SS1 1LT

Portfolio Specials
Discounted portfolios!!
Check out our large selection of quality portfolios in-store.
Up to 60% off!

Local Artist
Dave Pilgrim is an Essex-based painter
Wonderful views of the Thames estuary and local areas.
» Slide show...

Home // Glue Booths // Glue Booth

GLUE BOOTH

Found: 17 items On view: 1 - 10 Pages: 1 2 Next >>

Laurence Mathews Gloobooth Model S500 H x W x D 385 x 580 x 350

Click picture to enlarge

Gloobooth Model S500
H x W x D 385 x 580 x 350
APPLICATIONS
For the removal and filtration of overspray generated in the application of Sunless Tanning solutions. When sunless tanning solution is sprayed through an airbrush or HVLP spray gun, a certain amount of the solution does not settle on the body, but floats around in the atmosphere.
Some will be breathed in by both the client or therapist, some will settle on the walls and furniture covering them in a brown stain.
By using the SolarEx Mist extractor, this can be reduced to a minimum, making a cleaner healthier working environment.
The S600 can be used either as a stand alone unit, or in conjunction with a spray containment cubicle. The S500 should only be used along with a spray containment cubicle.

Was: £344.86
Our Price
Now only: £339.95 (You save: £4.91)

Laurence Mathews Gloobooth Model S600 H x W x D 445 x 600 x 165

Click picture to enlarge

Gloobooth Model S600
H x W x D 445 x 600 x 165
S600 230V 50Hz 80W 0.50m/sec 98ft/min 0.35 m/sec 69ft/min
APPLICATIONS
For the removal and filtration of overspray generated in the application of Sunless Tanning solutions. When sunless tanning solution is sprayed through an airbrush or HVLP spray gun, a certain amount of the solution does not settle on the body, but floats around in the atmosphere. Some will be breathed in by both the client or therapist, some will settle on the walls and furniture covering them in a brown stain. By using the SolarEx Mist extractor, this can be reduced to a minimum, making a cleaner healthier working environment.
The S600 can be used either as a stand alone unit, or in conjunction with a spray containment cubicle. The S500 should only be used along with a spray containment cubicle.

Was: £442.38
Our Price
Now only: £399.90 (You save: £42.48)

Laurence Mathews Gloobooth Model S1000 H x W x D 1850 x 1350 x 1000

Click picture to enlarge

Gloobooth Model S1000
H x W x D 1850 x 1350 x 1000
S1000 230V 50Hz 105W 0.50m/sec 98ft/min 0.35m/sec 68ft/min
FEATURES
These units are recirculatory, i.e. filtered air is exhausted back into the workplace.
Comprising:
Particulate filter to 5.0 microns with pad filter -Axial fan (S600 has 2 x Axial Fans), UL, VDE and CSA approved - Sealed electrical wiring and switch(s) downstream of filters – Backstand/Carrying Handle - Illuminated On/Off Switch - Steel Construction - Powder Coated Black Finish.

APPLICATIONS
For the removal and filtration of overspray generated in the application of Sunless Tanning solutions. When sunless tanning solution is sprayed through an airbrush or HVLP spray gun, a certain amount of the solution does not settle on the body, but floats around in the atmosphere.
Some will be breathed in by both the client or therapist, some will settle on the walls and furniture covering them in a brown stain. By using the SolarEx Mist extractor, this can be reduced to a minimum, making a cleaner healthier working environment.

Was: £1263.31
Our Price
Now only: £1199.00 (You save: £64.31)

Laurence Mathews Gloobooth Model T370H <i>H x W x D 417 x 350 x 190</i>

Click picture to enlarge

Gloobooth Model T370H
H x W x D 417 x 350 x 190
FEATURES
These units are recirculatory, i.e. filtered air is exhausted back into the workplace.
Comprising: Particulate fibre filter to 10 microns - 4kg activated carbon filter - optional 0.3 micron HEPA (model T370H-H) Papst radial blower, brushless, external rotor motor type (self cooling), UL, VDE and CSA approved - Sealed electrical wiring and switch(s) downstream of filters – Steel construction finished in dove grey - Clear, acrylic, hinged fume hood.APPLICATIONSFor use in situations where external venting is impractical and hydrocarbon vapour and gas filtration is necessary. Applications include the handling and use of Electrochemicals.
(Cleaning solvents, conformal coatings etc) resins, sealants, adhesives, solder pots and solder irons. Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders.
Optional accessories available include Part No’s HE405 pleated HEPA particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. Stainless steel spillage trays and perforated grids.Filtration cabinets T370H are designed to vastly reduce and/or eliminate operator exposure to potentially harmful airborne contaminants in line with COSHH regulations 2002 and occupational exposure limits published annually in HSE document EH40/2002.
The basic design principal consists of drawing air, vapour and particulates away from the operator and passing contaminated air at a set velocity through an activated carbon filter and/or HEPA filter. Cleaned air is exhausted at the rear/right of the cabinet.

See also Air Brushes

Click here for more studio essentials

Was: £895.50
Special Price
Now only: £875.00 (You save: £20.50)

Related items

Aztek Airbrush
Wooden Box Set inc 6-head as

Revell Compressor "standard

Laurence Mathews Gloobooth Model T570H H x W x D 570 x 470 x 340

Click picture to enlarge

Gloobooth Model T570H
H x W x D 570 x 470 x 340
FEATURES
These units are recirculatory, i.e. filtered air is exhausted back into the workplace.Comprising: Particulate fibre filter to 10 microns - 4kg activated carbon filter - optional 0.3 micron HEPA (model T370H-H) Papst radial blower, brushless, external rotor motor type (self cooling), UL, VDE and CSA approved - Sealed electrical wiring and switch(s) downstream of filters – Steel construction finished in dove grey - Clear, acrylic, hinged fume hood.

APPLICATIONS
For use in situations where external venting is impractical and hydrocarbon vapour and gas filtration is necessary. Applications include the handling and use of Electrochemicals. (Cleaning solvents, conformal coatings etc) resins, sealants, adhesives, solder pots and solder irons.
Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders.
Optional accessories available include Part No’s HE405 pleated particulate HEPA filter for fine dust/powder and solder fume capture to 0.3-micron particles. Stainless steel spillage trays and perforated grids.Filtration cabinets T570H are designed to vastly reduce and/or eliminate operator exposure to potentially harmful airborne contaminants in line with COSHH regulations 2002 and occupational exposure limits published annually in HSE document EH40/2002.
The basic design principal consists of drawing air, vapour and particulates away from the operator and passing contaminated air at a set velocity through an activated carbon filter and/or HEPA filter. Cleaned air is exhausted at the rear/right of the cabinet.

See also Air Brushes

Was: £1123.88
Our Price
Now only: £1099.95 (You save: £23.93)

Related items

Aztek Airbrush
Wooden Box Set inc 6-head as

Revell Compressor "standard

Laurence Mathews Gloobooth Model T460S-C H x W x D 385 x 575 x 530

Click picture to enlarge

Gloobooth Model T460S-C
H x W x D 385 x 575 x 530
Comprising:
Particulate filter to 5.0 microns - 4kg (T460S-C) or 8kg (T670S-C) activated carbon filter - Centrifugal blower(s), brushless, external rotor motor type (Model T670S-C has two blowers), UL, VDE and CSA approved - Sealed electrical wiring and switch(s) downstream of filters – T670S-C has dual airspeed function - Steel construction finished in dove grey - Clear, acrylic, hinged fume hood.

Applications
For use in situations where external venting is impractical and hydrocarbon vapour and gas filtration is necessary. Applications include the handling and use of Electrochemicals. (Cleaning solvents, conformal coatings etc) resins, sealants, adhesives, solder pots and solder irons. Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders.
Optional accessories available include Part No’s HE495 (T460S-C) and HE705 (T670S-C) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. Stainless steel spillage trays and perforated grids.
These units are designed for operator protection whereby gases, fumes, vapours and particulate contaminants are filtered. Cleaned air is exhausted at the rear of the cabinet

See also Air Brushes

Was: £1351.25
Our Price
Now only: £1299.00 (You save: £52.25)

Related items

Aztek Airbrush
Wooden Box Set inc 6-head as

Revell Compressor "standard

Laurence Mathews Gloobooth Model T670S-C H x W x D 515 x 785 x 610

Click picture to enlarge

Gloobooth Model T670S-C
H x W x D 515 x 785 x 610
Comprising:
Particulate filter to 5.0 microns - 4kg (T460S-C) or 8kg (T670S-C) activated carbon filter - Centrifugal blower(s), brushless, external rotor motor type (Model T670S-C has two blowers), UL, VDE and CSA approved - Sealed electrical wiring and switch(s) downstream of filters – T670S-C has dual airspeed function - Steel construction finished in dove grey - Clear, acrylic, hinged fume hood.

Applications
For use in situations where external venting is impractical and hydrocarbon vapour and gas filtration is necessary. Applications include the handling and use of Electrochemicals. (Cleaning solvents, conformal coatings etc) resins, sealants, adhesives, solder pots and solder irons. Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders. Optional accessories available include Part No’s HE495 (T460S-C) and HE705 (T670S-C) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. Stainless steel spillage trays and perforated grids.
These units are designed for operator protection whereby gases, fumes, vapours and particulate contaminants are filtered. Cleaned air is exhausted at the rear of the cabinet.

See also Air Brushes

Was: £1899.98
Our Price
Now only: £1849.00 (You save: £50.98)

Related items

Aztek Airbrush
Wooden Box Set inc 6-head as

Revell Compressor "standard

Laurence Mathews Gloobooth Model T660H-C H x W x D 600x680x530

Click picture to enlarge

Gloobooth Model T660H-C
H x W x D 600x680x530
These units are recirculatory, i.e. filtered air is exhausted back into the workplace.
Comprising:
Particulate filter to 5.0 microns - 4kg (T660H-C) or 8kg (T930H-C) activated carbon filter - Centrifugal blower(s), brushless, external, rotor motor type (Model T930H-C uses two blowers), UL, VDE and CSA approved - Sealed electrical wiring and switch(s) – T930H-C has dual airspeed function - Steel construction finished in dove grey - Hood enclosure workstation complete with clear polycarbonate panel and hood illumination.
For use in situations where external venting is impractical and hydrocarbon vapour and gas filtration is necessary.
Applications include the handling and use of electrochemicals (cleaning solvents, conformal coatings etc) resins, sealants and adhesives both in aerosol and static form, solder pots and solder irons.
Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders.
Optional accessories available include Part No’s HE495 (T660H-C) and HE705 (T930H-C) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. Stainless steel spillage trays and perforated grids.
These units are designed for operator protection whereby gases, fumes, vapours and particulate contaminants are filtered. Cleaned air is exhausted at the rear of the cabinet.

Was: £1456.41
Our Price
Now only: £1399.00 (You save: £57.41)

Laurence Mathews Gloobooth Model T930H-C H x W x D 740x960x720

Click picture to enlarge

Gloobooth Model T930H-C
H x W x D 740x960x720
These units are recirculatory, i.e. filtered air is exhausted back into the workplace.Comprising: Particulate filter to 5.0 microns - 4kg (T660H-C) or 8kg (T930H-C) activated carbon filter -
Centrifugal blower(s), brushless, external, rotor motor type (Model T930H-C uses two blowers), UL, VDE and CSA approved -
Sealed electrical wiring and switch(s) – T930H-C has dual airspeed function - Steel construction finished in dove grey -
Hood enclosure workstation complete with clear polycarbonate panel and hood illumination.

APPLICATIONS
For use in situations where external venting is impractical and hydrocarbon vapour and gas filtration is necessary. Applications include the handling and use of electrochemicals (cleaning solvents, conformal coatings etc) resins, sealants and adhesives both in aerosol and static form, solder pots and solder irons.
Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders.
Optional accessories available include Part No’s HE495 (T660H-C) and HE705 (T930H-C) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. Stainless steel spillage trays and perforated grids.
These units are designed for operator protection whereby gases, fumes, vapours and particulate contaminants are filtered. Cleaned air is exhausted at the rear of the cabinet.

Was: £2144.37
Our Price
Now only: £2099.00 (You save: £45.37)

Laurence Mathews Gloobooth Model T660H-D H x W x D 660 x 680 x 610

Click picture to enlarge

Gloobooth Model T660H-D
H x W x D 660 x 680 x 610
These units exhaust air via flexi-duct externally to atmosphere.
Comprising:
Particulate filter to 5 microns - Centrifugal blower(s), brushless, external rotor motor type (Model T930H-D has two blowers), UL, VDE and CSA approved - Sealed electrical wiring and switch, downstream of filter - 2 metre x 100mm flexi-duct (T930H-D uses two flexi-ducts) - All Steel construction finished in dove grey - Hood enclosure workstation complete with clear polycarbonate panel and hood illumination.

APPLICATIONS
General-purpose workstation. Fine particulate, fume/vapour and gases are pumped to atmosphere via flexi-duct through wall, window or partitioning etc. Applications include the handling and use of electrochemicals (cleaning solvents, conformal coatings etc.) resins, sealants and adhesives both in aerosol and static form, solder pots and solder irons.
Also used in orthopaedics and dental laboratories for controlling staff exposure to, typically, methyl methacrylate, cyanoacrylate adhesives and for the safe weighing of hazardous powders.
Optional accessories available include Part No’s HE495 (T660H-D) and HE705(T930H-D) pleated particulate filter for fine dust/powder and solder fume capture to 0.3-micron particles. (Optional filters would be fitted when, for example, moving solder fume from a confined, badly ventilated room to a larger, better ventilated area within a building).
These units are designed for immediate operator protection whereby large particulates (> 5 microns) are filtered and fine particulates (< 5 microns) together with gases, vapours and fumes within the hood are exhausted to atmosphere via the flexi-duct.WEIGHT: T660H-D= 26 kg

Was: £1111.55
Our Price
Now only: £1075.00 (You save: £36.55)